| 
|
|
|
| Widths: 3”-6” |
Heart content: 95-100% heart |
| Lengths: 2’-12’ for flooring; 3’-12’
for paneling (longer lengths by availability) |
Grades available: Quarter sawn pinstripe vertical
grain pattern with occasional nail holes |
|
Antique Legacy™ Vertical Heart Pine’s characteristic trait is rich
red pin striping of 95 to 100 percent heart wood. Slight nail staining and nail
holes provide a rustic charm that blends perfectly with the antique, building-reclaimed
wood.
Characteristics:
- Luminous, vibrant color…copper to burgundy tones
- 100 percent true vertical grain with no growth rings more than 45 degrees
perpendicular to the face
- 98 to 100 percent heartwood
- At least 6 growth rings per inch
- Somewhat more frequent and slightly larger knots (up to 1-1/2”) than
river-recovered wood
- Average 15 nail holes per 100 square feet; slight staining
- 1225 on the Janka scale comparable to red oak (1290) & 29 percent more
stable
Dimensions
- Floor and paneling, widths from 2-1/4" to 5-1/4” face or custom
- Treads, laminated 11-1/4”
- Lumber up to 2" x 6"
- Architectural millwork is full thickness, e.g., Crown: 3/4x5-1/2”
Milling
- Flooring is ordered by the square foot and is trimmed to provide 100 percent
usable material for the grade. Standard lengths are random from 1' to 12' and
standard milling is tongue and groove in 'flooring match' with more wood above
the tongue, a back relief pattern and a nail groove over the tongue to ease installation.
- Paneling standard lengths are 3' and longer. Milling is available in V-joint,
single-bead or double-bead or custom.
- stair parts include handrails, treads, balusters, newels, newel caps, stringers
and risers and come in many antique patterns as well as all standard ones.
- Architectural millwork is full dimension and is based on the 8000 series patterns
last published in 1925. Goodwin offers a complete line of mouldings including
base, shoe, cover or scotia, crown, step, picture, panel, thresholds, quarter
round, casings, rosettes, picture frame, reeded and more.
- Custom milling patterns and specific lengths are available for an additional
cost.
Original Growth vs. Old and New
Growth
Comparisons Chart
[Woods] [History]
[Gallery] [Products] [About
Us] [How To] [Contact
Us] [FAQs] [Sitemap] [Home]
|
